Placas para caminos y cubiertas para zanjas en alquiler

United Rentals offers a wide selection of trench and road plate rentals to ensure jobsite safety and access. Our inventory includes heavy-duty steel road plates for vehicle and equipment crossings, and lightweight composite trench covers ideal for lighter vehicles and pedestrian pathways.

Para ver nuestra lista completa de placas para caminos y cubiertas para zanjas en alquiler, consulte los siguientes artículos. Si quiere obtener más información, visite nuestra sección de recursos.

Código de clase de categoría

900-0248

3.7 ft. by 3.7 ft. Low-Profile Composite Trench Cover

Supports up to 3,500 lbs.
Installation requires only one person
Reinforced edges to protect trench cover from rough handling on jobsites
Not for use in roadways
Usos: Ideal for creating walkways over holes and trenches

Código de clase de categoría

900-0249

3.9 ft. by 2.6 ft. Low-Profile Composite Trench Cover

Supports up to 3,500 lbs.
Installation requires only one person
Ramped edges for easy access and stability
Not for use in roadways
Usos: Ideal for pedestrian and light vehicle passageways

Código de clase de categoría

900-0400

Esteras de control para deslodar

Cubiertas en pirámides cónicas para desplazar y recolectar lodo
Dimensiones de 12 ft por 7 ft por 4 in
Duraderas, livianas y fáciles de instalar
Instalar sobre suelo irregular, como asfalto, césped, arena, hierba y lodo
Usos: Ideal para crear una entrada temporal al sitio de trabajo que proporcione acceso al sitio y, a su vez, minimice el sedimento que sale del sitio

Código de clase de categoría

900-0452

7.5 ft. by 2.3 ft. Modular Composite Road Plate, End Section

The entire system supports vehicles up to 97,000 lbs.
Installation requires only two people
Ramped edges for easy access and stability
End caps are not load-bearing
Usos: Ideal for creating temporary road covers for traffic

Código de clase de categoría

900-0453

7.5 ft. by 1.6 ft. Modular Composite Road Plate, Inner Section

Soporta vehículos de hasta 97,000 lb
Installation requires only two people
Ramped edges for easy access and stability
Use multiple inner pieces to cover any trench length
Usos: Ideal for creating temporary road covers for traffic

Código de clase de categoría

943-7430

Estructura guía de láminas apiladas tipo D de 16 ft

Código de clase de categoría

944-7482

Viga de suspensión de 25 ft

Código de clase de categoría

944-9820

4 ft. by 16 ft. Steel Road Plate

4 ft. by 16 ft.
2,600 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9825

4 ft. by 20 ft. Steel Road Plate

4 ft. by 20 ft.
3,200 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9840

8 ft. by 15 ft. Steel Road Plate

8 ft. by 15 ft.
4,800 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9842

8 in por 12 ft Steel Road Plate, 1.25 in. Thick

8 in por 12 ft
6,100 lb. approximate weight
A36 steel
1.25 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9843

6 in por 12 ft Steel Road Plate, 1.5 in. Thick

6 in por 12 ft
6,600 lb. approximate weight
A36 steel
1.5 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9845

8 ft. by 15 ft. Steel Road Plate, 1.5 in. Thick

8 ft. by 15 ft.
11,000 lb. approximate weight
A36 steel
1.5 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9851

8 ft. by 16 ft. Steel Road Plate, 1.25 in. Thick

8 ft. by 16 ft.
8,100 lb. approximate weight
A36 steel
1.25 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9852

8 ft. by 20 ft. Steel Road Plate, 1.25 in. Thick

8 ft. by 20 ft.
10,200 lbs.
A36 steel
1.25 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9854

8 ft. by 10 ft. Steel Road Plate, 1.25 in. Thick

8 ft. by 10 ft.
5,100 lbs.
A36 steel
1.25 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9873

10 ft. by 10 ft. Steel Road Plate

10 ft. by 10 ft.
4,000 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9875

10 ft. by 16 ft. Steel Road Plate

10 ft. by 16 ft.
6,500 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9876

10 ft. by 20 ft. Steel Road Plate

10 ft. by 20 ft.
8,100 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9892

Steel Road Plate Quick Release Lifting Tool

Quick-release lifting tool
Connects flush to picking plate for single-point lift
Alloy steel
8,000 lb. capacity
Usos: Ideal para elevar placas para caminos de manera eficiente, reduciendo la tensión en los operadores

Código de clase de categoría

944-9900

Steel Road Plate Swivel Lifting Ring

Swivel lifting ring
1.5-in. thread size
Alloy steel
5,000-15,000 lb. capacity
Usos: Ideal for lifting and moving steel road plates

Código de clase de categoría

944-9909

4 ft. by 12 ft. Steel Road Plate

4 ft. by 12 ft.
1,900 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9910

4 ft. by 4 ft. Steel Road Plate

4 ft. by 4 ft.
650 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9913

4 ft. by 6 ft. Steel Road Plate

4 ft. by 6 ft.
950 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9914

4 in por 8 ft Steel Road Plate

4 in por 8 ft
1,300 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9915

4 in por 8 ft Steel Road Plate, Non-Skid Coating

4 in por 8 ft
1-in. thick
A36 steel
Non-skid coating
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9917

4 ft. by 10 ft. Steel Road Plate

4 ft. by 10 ft.
1,600 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9918

5 ft. by 5 ft. Steel Road Plate

5 ft. by 5 ft.
1,000 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9920

5 ft. by 8 ft. Steel Road Plate

5 ft. by 8 ft.
1,600 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9924

5 ft. by 10 ft. Steel Road Plate

5 ft. by 10 ft.
2,000 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9926

5 ft. by 12 ft. Steel Road Plate

5 ft. by 12 ft.
2,400 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9928

6 ft. by 8 ft. Steel Road Plate

6 ft. by 8 ft.
1,900 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9930

6 ft. by 10 ft. Steel Road Plate

6 ft. by 10 ft.
2,400 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9931

6 ft. by 10 ft. Steel Road Plate, Non-Skid Coating

6 ft. by 10 ft.
2,400 lb. approximate weight
A36 steel
Non-skid coating
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9932

6 in por 12 ft Steel Road Plate

6 in por 12 ft
2,900 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9937

8 ft. by 16 ft. Steel Road Plate, 1.5 in. Thick

8 ft. by 16 ft.
11,000 lb. approximate weight
A36 steel
1.5 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9939

8 in por 12 ft Steel Road Plate, 1.5 in. Thick

8 in por 12 ft
8,800 lb. approximate weight
A36 steel
1.5 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9940

8 ft. by 8 ft. Steel Road Plate

8 ft. by 8 ft.
2,600 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9942

8 ft. by 10 ft. Steel Road Plate

8 ft. by 10 ft.
3,200 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9943

8 in por 12 ft Steel Road Plate

8 in por 12 ft
3,900 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9944

8 ft. by 16 ft. Steel Road Plate

8 ft. by 16 ft.
5,200 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9946

8 ft. by 20 ft. Steel Road Plate

8 ft. by 20 ft.
6,500 lb. approximate weight
A36 steel
Centered, single-point lift for improved balance and control
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9947

8 ft. by 10 ft. Steel Road Plate, 1.5 in. Thick

8 ft. by 10 ft.
7,300 lb. approximate weight
A36 steel
1.5 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9955

8 ft. by 20 ft. Steel Road Plate, 1.5 in. Thick

8 ft. by 20 ft.
14,000 lb. approximate weight
A36 steel
1.5 in. thick
Usos: Ideal for temporarily covering excavations, trenches and unstable surfaces during construction

Código de clase de categoría

944-9985

Rampa portátil 3x10

United Rentals has the trench cover and road plate solutions for your project. Our durable road plate rentals are designed to handle heavy-duty vehicles and equipment loads, making them ideal for construction sites, highway work and utility maintenance. Several of our steel plates feature an anti-skid coating for added safety and increased thickness for extra crossing capacity. (Additional equipment may be necessary to lift and install steel traffic plates.) For pedestrian access or for lighter vehicles, our composite trench cover rentals are easy to install and reposition. We offer roadway plates and trench cover plates in various dimensions and weight capacities to meet your specific needs. Trust United Rentals for your road plate rental to keep your project moving safely and efficiently.

Learn more about our road plates and trench covers in our FAQ section below.

What is the difference between road plates and trench covers?

The primary difference between road plates and trench covers is their material and intended use. Road plates, also known as street plates, are made from heavy-duty steel or composite materials and are designed to support the weight of vehicles and heavy equipment crossing over trenches or excavations. Trench covers are often made of lighter composite materials, making them portable and ideal for covering smaller holes or creating safe pedestrian walkways. Composite trench covers can often be installed by one or two people, whereas steel or composite road plates require equipment to lift.

What materials are needed to secure, install and remove road plates and trench covers?

Due to their significant weight, steel and composite road plates require lifting equipment, such as a forklift or a crane with a plate lifting tool, for installation and removal. They can be secured with pins or by building an asphalt edge to prevent shifting. Lightweight composite trench covers can often be installed manually by one or two workers and may be secured with bolts if needed.

How many road plates or trench covers do I need? What size do I need?

To determine the number and size of road plates or trench covers, measure your trench width and add a minimum of 12 to 24 inches of overlap on each side for safety. For assistance deciding the number and size of road plates needed for your project, contact a United Rentals representative.

Env: Dev -> Release Tag: builds/github/2026/develop/build-1064